Parameter name
Default value
Description
LOGSRVR
Null
Specifies one address for a syslog server in dotted-
decimal formatl (IPv4), colon-hex format (IPv6, if
supported), or DNS name format.
The value can contain 0 to 255 characters.
M
MATCHTYPE
0
Specifies how an incoming or outgoing phone
number is compared with the contacts on the
phone to display the contact name.
0: Displays the contact name if all the digits match.
1: Displays the contact name if all the digits of the
shorter number match with the right-most digits of
the longer number. For example, a 5-digit
extension number can be matched with the 8-digit
phone number saved in the contacts.
2: Displays the contact name if atleast the last four
digits match. If the contacts are saved in multiple
sources, for example, PPM, Exchange, or locally,
the contact name saved first is displayed.
MAX_TRUSTCERTS
6
Specifies the maximum number of trusted
certificates files defined by this parameter that can
be downloaded to the phone. Valid values are from
1 to 10.
MEDIA_ADDR_MODE
4
Specifies the IP address of the endpoint when both
IPv4 and IPv6 addresses are provided. This
parameter is used for SIP signalling.
Value operation:
• 4: IPv4
• 6: IPv6
• 46: Prefer IPv4 over IPv6
• 64: Prefer IPv6 over IPv4
MEDIAENCRYPTION
9
Specifies which media encryption (SRTP) options
is supported.
3 options are supported in a comma-separated list.
Options must match to those specified in CM IP-
codec-set form.
• 1: aescm128-hmac80
• 2: aescm128-hmac32
• 3: aescm128-hmac80-unauth
• 4: aescm128-hmac32-unauth
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
108
