Parameter name
Default value
Description
Note:
If default port is not used, both the SLA Mon
agent and server must be configured with the
same port. SLMSRVR impacts the phone's
SLA Mon agent configuration. A
corresponding configuration must also be
made on the SLA Mon server
agentcom-
slamon.conf
file
SLMSTAT
0
Specifies if the SLA Monitor agent is enabled or
not.
Value Operation:
• 0: Disabled
• 1: Enabled
SNMPADD
Null
Specifies a list of source IP addresses from which
SNMP query messages will be accepted and
processed.
Addresses can be in dotted-decimal format (IPv4),
colon-hex format (IPv6, if supported), or DNS
name format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters. The
default value is null.
SNMPSTRING
Null
Specifies a security string that must be included in
SNMP query messages for the query to be
processed.
Valid values contain 0 through 32 ASCII
alphanumeric characters.
The default value is null. Null disables SNMP.
SNTPSRVR
Null
Specifies a list of addresses of SNTP servers.
Addresses can be in dotted-decimal or DNS name
format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters.
SNTP_SYNC_INTERVAL
1440 minutes
Specifies the time interval, in minutes, during which
the phone will attempt to synchronize its time with
configured NTP servers. Valid values are from 60
to 2880 minutes.
SPEAKERSTAT
2
Specifies the operation of the speakerphone.
Value Operation:
• 0: Speakerphone disabled
Table continues…
September 2017
Installing and Administering Avaya J129 IP Phone
125
