Parameter name
Default value
Description
OCSP_ENABLED
0
Specifies that OCSP is used to check the
revocation status of the certificates. Value
operation:
• 0: Disabled. Certificate revocation checking is not
performed.
• 1: Enabled. Certificate revocation checking is
performed.
OCSP_HASH_ALGORITHM
0
Specifies the hashing algorithm for OCSP request.
Value operation:
• 0: SHA1 hash algorithm
• 1: SHA256 hash algorithm
OCSP_NONCE
1
Specifies whether a nonce is added in OCSP
requests and expected in OCSP responses.
Value operation:
• 0: Not added to OCSP request.
• 1: Added to OCSP request.
OCSP_TRUSTCERTS
Specifies a comma separated list of OCSP trusted
certificates that are used as OCSP signing
authority for checking the revocation status of the
certificate. This applies to when the OCSP
responder is using a different CA. Spaces are not
permitted in this parameter.
OCSP_URI
Null
Specifies the URI of an OCSP responder. The URI
can be an IP address or hostname. Valid values
contain 0 to 255 ASCII characters, zero or one
URI.
OCSP_USE_CACHE
1
Specifies that the OCSP caching is in use.
Value operation:
• 0: OCSP is not used. Always check with OCSP
responder.
• 1: OSCP cache caching is used.
OCSP_URI_PREF
1
Specifies the preferred URI for use in an OCSP
request when more than one source is available.
Value operation:
• 1: Use the OCSP_URI and then the OCSP field
of the Authority Information Access (AIA)
extension of the certificate.
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
112
