Avaya G700 Скачать руководство пользователя страница 365

Страница: 365 / 494

Post-upgrade tasks

Issue 7 January 2005

365

To busy out trunks

1. Busy out trunks that were busied out before the upgrade (see

To record all busyouts

page 328).

To check for translation corruption

1. Type

newterm

and press Enter.

If you do not get a login prompt and see the following message:

Warning: Translation corruption detected

follow the normal escalation procedure for translation corruption before continuing the
upgrade.

To resolve alarms

1. On the Maintenance Web Interface, under Alarms click Current Alarms to examine the

alarm log.

2. If any alarms are listed, click Clear All.

3. Resolve new alarms since the upgrade through Communication Manager using the

appropriate maintenance book.

To re-enable alarm origination

1. Telnet to the S8300 and log on.

2. At the command prompt, type

almenable -d b -s y

where

-d b

sets the dialout option to

both (numbers)

-s y

enables SNMP alarm origination

3. Type

almenable

(without any options) to verify alarm origination enabled status.

To back up the system

1. Using the Maintenance Web Interface, back up the system as you did before the upgrade

selecting Save Translations and all backup sets.

To restart LSPs (if any)

To restart Communication Manager on an LSP after the upgrade:

1. Open a Telnet session on the S8300 (LSP).

2. At the command line, type

start -ac

and press Enter.

This completes the upgrade process for a G700 with an S8300.

Содержание G700















































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Бренды по названию

Популярные бренды

Avaya G700, Руководство по установке

Результаты поиска

Содержание G700

Отзывы:

Бренды по названию

Популярные бренды