Upgrading an Existing S8300A to R2.2
252 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
7. Check the
Reports as: field for the release number of the S8300 software.
In this example, the release number is reported as R011x.02.0.524.0. This corresponds to
release 1.2.0.
Table 15
maps the release number to the Reports as: field, and specifies
whether or not a pre-upgrade update is required.
Pre-Upgrade Tasks — If the S8300 is the primary controller
Skip to
Upgrading the S8300A
on page 262, if the S8300 is configured as an LSP.
!
CAUTION:
CAUTION:
If you are upgrading an S8300 primary controller that has LSPs registered to it,
the LSPs must be upgraded before the primary controller. (You can use the SAT
command, list media-gateway, to see if there are LSPs registered to the S8300.)
Perform the following procedures if you are upgrading an S8300 that is configured as a primary
controller:
●
To clear alarms
●
To check link status
Table 15: Software Release Numbers
Release Number
Reported as
Release
Number
Pre-upgrade
update
Required?
From:
R011x.01.0.xxx
To:
R011x.01.9.xxx
1.1.0 to
1.1.9
No
From:
R011x.02.0.xxx
To:
R011x.03.0.xxx
1.2.0 to
1.3.0
Yes
From:
R011x.03.1.xxx
To:
R011x.03.9.xxx
1.3.1 to
1.3.9
No
From:
R012x.00.0.xxx
To:
R012x.00.9.xxx
2.0.0 to
2.0.9
No
