Administer Communication Manager
Issue 7 January 2005
181
3. Close the screen.
Administering the LSP Form
If the primary server has LSPs, you must enter the LSP node names on the LSP form to enable
the LSPs to get translations updates from the primary controller. Once the LSPs are
successfully entered on the LSP form, their status can be viewed with the
display lsp
command.
Note:
Note:
The LSP node names must be administered on the node-names-ip form before
they can be entered on the LSP form.
To add LSP names to the LSP screen
1. At the SAT prompt, type
change lsp
to open the LSP screen.
LSP Screen
VLAN
The VLAN number assigned to the C-LAN, if any.
Number of CLAN
Sockets Before
Warning
The threshold for the number of sockets used by this
C-LAN that triggers a warning message to be sent to the
error log.
Table 9: IP interfaces field descriptions (continued)
Field
Conditions/Comments
2 of 2
change lsp
Page 1 of 16
LOCAL SURVIVABLE PROCESSOR
Number NAME
IP Address
Service
Translations
State? Updated
1 node-10-LSP_ 192.168.1.50
in-service
14:21
5/4/2003
2 ____________
out-of-service
3 ____________
out-of-service
4 ____________
out-of-service
5 ____________
out-of-service
6 ____________
out-of-service
7 ____________
out-of-service
8 ____________
out-of-service
9 ____________
out-of-service
10 ____________
out-of-service
11 ____________
out-of-service
12 ____________
out-of-service
13 ____________
out-of-service
14 ____________
out-of-service
15 ____________
out-of-service
16 ____________
out-of-service