Installing a New G700 with an S8300
178 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
3. If the network region of the G700 (1 in this example) is different from that of the S8500 or
S8700 CLAN board(s), you must interconnect the two regions.
Press NextPage twice to display page 3, of the Inter Network Region Connection
Management screen.
This screen shows the source region (1) and the first 15 destination network region
numbers. (Pages 4–19 show destination regions 16–250).
IP Network Region Screen, Page 3
4. Type the number for the type of codec set (1–7) that the S8500 or S8700 will use to
interconnect the G700 and the C-LAN board(s) in the row corresponding to the region of the
C-LAN.
In this example, the C-LAN is in region 9 and codec-set type 3 is to be used for the
interconnection between region 1 and region 9. (In this example, codec type 1 is used for
communication within region 1)
The SAT command, list ip-codec-set, lists the types of codecs available on this server.
For more detail about the Inter Network Region Connection Management form, see
‘‘Administration for Network Connectivity for Avaya Communication Manager,
555-233-504.’’
5. Press F3 (Enter) when complete.
display ip-network-region 1
Page 3 of 19
Inter Network Region Connection Management
src dst
rgn rgn
codec-set
direct-WAN
WAN-BW-limints
Intervening-regions
1
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
3
1
10
1
11
1
12
1
13
1
14
1
15
