Connecting the main distribution frame to stations and the public switched telephone network
156
Installing the Avaya S8700 Media Server with an Avaya G650 Media Gateway
December 2003
Single modular plug-ended 4-pair station cable
—
Use this cable between adapters and information
outlets that require push-on connections. It can also be used when 4-pair station cables are field-
terminated on the 110-type terminal blocks in the equipment room or satellite closet and modularly
connected to information outlets. The station cables are available in the following lengths:
•
10 feet (3.05 meters)
•
25 feet (7.62 meters)
•
50 feet (15.24 meters)
•
75 feet (22.86 meters)
•
100 feet (30.5 meters)
•
150 feet (45.72 meters)
•
200 feet (61 meters)
NOTE:
If more than 200 feet (61 meters) of 4-pair station cable is required, a 451A in-line adapter
(double-ended modular female connector) is attached to the cable and a second 4-pair
cable of the required length is plugged into the adapter. See
Figure 57, Example of
extending 4-pair station cables,
on page 157.
Double modular plug-ended 4-pair station cable
—
Use this cable to provide nonstandard length runs
between adapters and information outlets with push-on connections. It can also be used between adapters
and modularly connected information outlets. It is available in the same lengths as the single modular
plug-ended cable.
Bulk Cable
—
Same as the 25-pair cable or multiple 25-pair cable; however, the bulk cable is not
equipped with connectors. Use this cable between the equipment room and satellite closets when both are
equipped with punch-down type terminal/connecting blocks.
4-pair station cable
—
Use this cable when 4-pair station cables are to be field-terminated on the 110-
type terminal blocks in the equipment room or satellite closet and the information outlets require push-on
connections
