Site Hardware Preparation
.42
Avanti Installation Manual 2.0
11.
PRODELIN SPACEWAY / JUPITER 0.74M ANTENNA ASSEMBLY
8. Place
the
short
adapter
bracket in position near the end
of the feed support arm and lower the radio onto it as
shown in Figure 16
9. Insert
one
5/16
inch
bolt, with flat washer and lock
washer, up through the feed support arm and the short
adapter bracket, into the threaded socket at the rear of
the transmitter
10. Tighten the bolt to secure the adapter bracket and
radio to the feed support arm. Tighten only until snug.
FIGURE 16
Securing the rear of the radio assembly
Tighten the nut only enough to secure the radio and adapter bracket to the feed support arm. Excessive
tightening of this nut can crack or crush the adapter bracket.
