AVANT A37190, Руководство оператора

Страница: 10 / 66

10 (66)
DANGER
Risk of entanglement and crushing - Stop the attachment before cleaning or
removing blockages.
The attachment can start to rotate immediately after a blockage is
removed. Always follow the safe stopping procedure to prevent all rotating parts from
moving when clearing a blockage.
. ..
DANGER
Risk of cutting and severing - Sharp edges and severing
points on work tools.
Beware of the sharp blades and risk
of crushing especially during maintenance or when removing
blockages. Always stop the attachment by following the safe
stopping procedure. To make sure that the attachment will
not rotate, disconnect the multiconnector (or hydraulic quick
couplings) before going near it. Note that the loader boom
moves down and may be tilted even if the engine has been
stopped. Never go under a raised boom or any component of
the attachment. Keep away from the moving linkage.
Remember to wear proper personal protective equipment:

The noise level at the driver's seat may exceed 85 dB(A) depending on loader
model and operating cycle. Extended exposure to loud noise can cause
hearing impairment. Wear hearing protection while working with the loader.

Wear protective gloves.

Wear safety boots whenever working with the loader.

Wear safety glasses e.g. when handling hydraulic components.

Handling some types of materials materials can cause spreading of dust.
Protect yourself from dust with a respirator mask.