AVANT A37190, Руководство оператора

Страница: 40 / 66

40 (66)

Use the rotary hoe only for mixing of soft top layers of the ground.
. ..
Adjustments:
The blades can fitted to the outer holes on the frame of the rotary hoe (standard configuration), or to the inner
holes. If only a smaller area needs to be tilled, bolt the blades to inner holes.
Operating the rotary hoe:
CAUTION
Risk of impact and entanglement - Start the rotary hoe only when beginning to use
it.
Do not leave the equipment running unattended. Do not go near the equipment when
another person operates the controls of the loader.
To start the rotary hoe, turn the auxiliary hydraulics control lever of the loader to its locked position. The rotary
hoe should be used with high engine rpm, and depending on the model of the loader, one or two auxiliary
hydraulic pumps are used (where applicable).
The more dense the soil is, the more the rotary hoe requires hydraulic power from the loader. If the soil is
loose, slightly higher driving speed may be used, but on stiff and compact soil high engine rpm must be used
and the driving speed must be relatively low. In some cases, it may be useful to use low operating depth to
break the surface of the soil, and then till the soil more thoroughly with a second run.
If the rotary hoe stops rotating, the driving speed has been too high or the hoe has hit a rock. If an obstacle on
the ground cannot be removed, try to go around it, as the rotary hoe should not be used to chop obstacles on
the ground.
.