9 (66)
WARNING
Risk of tipping over - Always transport the attachment as low and close to the
machine as possible to keep the centre of gravity low.
On slippery surfaces drive
slowly and deliberately. Operate the controls of the loader slowly and calmly
especially on inclined terrain.
Note that the drive unit is hinged and moves freely. When transporting, the drive unit
must be tilted forward and locked with locking pin. Do not tilt the drive unit up
excessively, as it could tip over. Keep the axle pointed towards the ground in a
position where the axle will not swing or hit the loader, ground, or any obstacle.
The loader can move slightly caused by the oscillating motion of rotating tool, make
sure that moving will not cause hazards. Do not press the loader boom down too
hard, and keep front tyres in contact with the ground.
Make sure that the attachment is properly supported for maintenance and
inspections. Store the tool properly and make sure that the drive unit is supported
before removing the locking pin of the angle adjustment of the drive unit. Never
perform any maintenance or adjustments, or change drive unit tools, while the loader
engine is running.
Use the attachment only for its intended use and only with original tools on the
attachment.
Shut down the loader and place the attachment to a safe position as shown in Safe
stopping procedure before any cleaning, maintenance, or adjustments.
Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to the driver's area, loose rocks, and slippery
surfaces.
Make sure to use only an attachment that is in good condition. Do not modify the
attachment in any way that could affect its safety.
Use the attachment only for its intended purpose. Other use may create unnecessary
safety risks, and the equipment may get damaged.
Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.
Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.
DANGER
Risk of serious injuries from rotating parts - Keep safe
distance. Entanglement around the rotating tools or
getting crushed under the loader boom can cause
serious injuries or death.
Do not leave the driver’s seat
while the attachment is in operation, or when it is lifted off
from the ground, unless using tools that are specifically
intended to be used while staying near them. Also, keep
others at a safe distance from the equipment and stop the
attachment immediately latest when there are others closer
than 1 meter from the attachment. Follow safe stopping
procedure when going near the attachment or when changing
tools.
Содержание A37190
Страница 2: ...Multi function drive unit 2021 1 ...
Страница 44: ...44 66 ...
Страница 52: ...52 66 Typical position of the screening drum during use ...
Страница 66: ......