AVANT A37190, Руководство оператора

Страница: 35 / 66

35 (66)
Normal running direction
Reverse rotation while emptying the mixer
Operate the attachment keeping the hydraulic flow within recommended range. Never
exceed maximum allowed input of hydraulic energy.
The concrete mixer is intended to be filled manually, e.g. with shovels. Never lift materials
from the ground with the concrete mixer itself to avoid damaging the drum.
CAUTION
Risk of flying debris - Keep rotation speed low and check the drum for foreign
materials.
Before starting the concrete mixer, make sure that there are no foreign objects
in the drum that could be ejected from the attachment or that could damage the mixer.
Always follow the recommended operating speed.
Always use low loader engine rpm and only the 1-pump setting of the auxiliary hydraulics.
Keep the rotating speed of the mixer low, as shown in technical specifications. The mixer
will not mix material efficiently, and the hydraulic motor of the mixer may get damaged or
material may be thrown from the mixer if it is rotated too fast.
To avoid material from getting stuck, do not fill the mixer unless it is rotated
simultaneously. Also, do not throw material in, but instead pour material in controlled way.
Do not stop filled mixer.
7.3.4 Cleaning of concrete mixer
Clean the concrete mixer immediately after use. Use a water hose to clean the inside drum. Unload any
remaining material from the mixer to a suitable place, any material left in the drum will dry and build up even
more material.
You may also use a pressure washer and mild detergent, but generally spraying inside the drum at high
pressure should be avoided. Do not use solvents. Never spray directly at the hydraulic components, or at the
labels on the attachment either. Scrape any remaining material from the drum to prevent the accumulation of
material. Small fragmented gravel may also be used for cleaning the drum, rotate with plenty of water for a
couple of minutes and empty the drum to a suitable location.