AVANT A37190, Руководство оператора

Страница: 42 / 66

42 (66)
7.6.1 Using the screw pile adapter
Before starting to use the screw pile adapter
Plan the drilling operation in advance. Make sure that it is safe to dig at the area. Explore the operating area
and find out about possible electricity cables, water mains or other possible obstacles before starting to work.
Hitting an obstacle may cause a serious accident. If in doubt about possible obstacles, seek professional
advice and consider using detection equipment. You may be required by law to contact your local authorities
before using an auger to make sure that there are no hidden and potentially dangerous obstacles in the
ground.
Operating the screw pile adapter:
DANGER
Risk of entanglement - Always stop the attachment by
following the safe stopping procedure before leaving the
driver's seat.
Never allow anyone to be near the work area
when the Multi function drive unit is in use. Remember to
follow the safe shutdown procedure also if the screw pile gets
stuck in the ground. When removing a blockage, the
attachment may rotate unexpectedly immediately after the
blockage has been cleared. Keep a safe distance to a
rotating auger and stay back if other person operates the
controls of the loader. Never grasp the auger or try to control
or guide it manually.
The screw pile adapter is intended to be rotated slowly (used with low engine rpm).
.