AVANT A37190, Руководство оператора

Страница: 23 / 66

23 (66)
6.2.3 Working on uneven ground
Extra caution is needed when using the equipment on inclined terrains and slopes. Drive slowly especially on
inclined, uneven, or slippery surfaces, and avoid sudden changes in speed or direction. Operate the controls
of the loader with careful and smooth movements. Watch out for ditches, holes on the ground, and other
obstacles, as hitting an obstacle may cause the loader to tip over.
Maximum lifting capacity can not be achieved on inclined terrain. On horizontally tilted terrain the load must
not be lifted high. The loader frame articulation should be kept straight when lifting heavy loads; turning the
load during lifting operation will affect the stability of the loader and may lead to overturning of the machine.
6.3 Transport position
When driving with the loader, keep the drive unit low and close to the loader for the best stability and visibility.
Always transport the attachment and its work tool as low and close to the loader as possible for the best
stability and visibility. Drive cautiously and avoid swinging of the drive unit, or hitting the ground.
Before transport:

Make sure all locking pins are securely locked.

Always stop the drive unit before driving with the loader.

After stopping the loader, always lower the drive unit or its tool on the ground.

The drive unit should be locked and point to forward direction

If using with the angle locking pin removed, tilt the attachment up so that it rests on the quick coupling
frame of the attachment to avoid swinging of the drive unit. If the drive unit begins to swing, use the
controls of the loader to tilt the attachment more up.
In the adjacent figure is a suggested position for
transporting the carousel broom. Correct position
depends on the work tool that is fitted on the drive unit
(if any), and the angle setting of the drive unit.
.