DL06 Micro PLC User Manual, 3rd Edition, Rev. E
5-302
Chapter 5: Standard RLL Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
ECOM100 Read Module Name (ECRDNAM) (IB-724)
ECOM100 Read Name will read the Module Name up to the number of specified characters
on a leading edge transition to the IBox.
ECRDNAM Parameters
• ECOM100#: this is a logical number associated with this specific ECOM100 module in the specified
slot. All other ECxxxx IBoxes that need to reference this ECOM100 module must reference this
logical number
• Workspace: specifies a V-memory location that will be used by the instruction
• Success: specifies a bit that will turn on once the request is completed successfully
• Error: specifies a bit that will turn on if the instruction is not successfully completed
• Module Name: specifies the starting buffer location where the ECOM100’s Module Name will be
placed
• Num Chars: specifies the number of characters (bytes) to read from the ECOM100’s Name field
DS
Used
HPP
N/A
Parameter
DL06 Range
ECOM100#
K
K0-255
Workspace
V
See DL06 V-memory map - Data Words
Success
X,Y,C,GX,GY,B
See DL06 V-memory map
Error
X,Y,C,GX,GY,B
See DL06 V-memory map
Module Name
V
See DL06 V-memory map - Data Words
Num Chars
K
K1-128
The Workspace parameter is an internal, private
register used by this IBox and MUST BE UNIQUE
in this one instruction and MUST NOT be used
anywhere else in your program.
Either the Success or Error bit parameter will turn on
once the command is complete.
In order for this ECOM100 IBox to function, you
must turn ON dip switch 7 on the ECOM100 circuit
board.
