Automation Direct Do-more H2 PLC Series, Руководство пользователя по оборудованию

Страница: 33 / 242

Do-more H2 Series PLC Hardware User Manual, 1st Edition, Rev. F - H2-DM-M
1–17
Chapter 1: Getting Started
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
According to the report, the PLC project was different in two areas. First, a new code-block was found
only in the PLC project. This new code-block is titled MyNewProgram and is highlighted in green.
The green color represents items that exist only in the Current Project (project in PLC) and not in the
Other (project in PC). Also, the comparison noted that a normally open contact (STR) was changed to
a normally closed contact (STRN) at $Main@0. This item is highlighted in blue which represents items
that are different between the PLC Project and the project in the PC.
Other colors used in the comparison are red, which notes items that exist only in the project on the
PC and not in the PLC and black which highlights items that are identical in both projects. There are
also numerous checkbox and radio button options available to help you analyze the differences between
projects.
Once you have connected to the CPU either by using the New Online option or using PLC
> Connect for offline projects, you may encounter the initialization windows shown below.
The Set PLC Clock option allows you to
set the internal, real-time clock of the PLC.
The Set PLC Clock window has
options for Timezones and Daylight
Savings Adjustments.
The Setup System Configuration option below allows you to configure the parameters of
the Do-more PLC. I/O module
configuration, CPU ports, and I/O
mapping profiles are a few of the
parameters available in the System
Configuration window. Refer to
the following section for Hardware
Configuration options.