Automation Direct Do-more H2 PLC Series, Руководство пользователя по оборудованию

Страница: 190 / 242

Do-more H2 Series PLC User Manual, 1st Edition, Rev. F - H2-DM-M
7–24
Chapter 7: Specifications - Specialty Modules
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
H2-EBC100 LED Indicators
H2-ERM(100)/H2-EBC100 Network Identifiers
Each module must be assigned at least one unique identifier to make it possible for other
devices to recognize it on the network. There are three identifiers possible with the
ERM/EBC modules:
• Module ID
• IP (Internet Protocol) Address
• Ethernet (MAC) Address
The first two are user selectable but the MAC address is set at the factory. The identifiers are
used to link the ERM module to its remote EBC slaves. The type of identifier chosen depends
on the protocol requirements of your particular application. The following table summarizes
Network Identifiers and their uses:
Network Identifiers
Identifier Protocol How to Set Format Notes
Module ID
IPX
DIP Switch Slave Number 1-63, Set ERM to 0
Module ID can be changed without
NetEdit3. When set, disables Module
ID selection in NetEdit3
NetEdit3 Slave Number 1-65535, Set ERM to 0 DIP Switch must be set to “0”
IP Address
UDP/IP NetEdit3
4 sets of numbers, up to three digits
each (192.168.76.3)
See your Network Administrator for
IP addresses
Ethernet (MAC) Address
IPX Set at Factory 12 Hex digits Factory assigned for IPX
H2-EBC100 LED Descriptions
Indicator Status Description
STATUS
ON (Green) Module is powered up and functional
OFF Module powerup failed
LINKGD
ON (Green) Properly connected to network
OFF Not connected to network or incorrect configuration
ACTIVE
ON or FLASHING (Red) Active Network Data
OFF Network Idle
ERROR
ON or FLASHING (Red) A fatal error has occurred
OFF No error present
100MBIT
ON 100Base T Frequency detected
OFF (With ACTIVE LED ON) - 10Base T Frequency detected
TXD
FLASHING (green) Serial port is transmitting data
RXD
FLASHING (green) Serial port is receiving data
STATUS
LINKGD
ACTIVE
ERROR
H2-EBC100
10/100 BASE-T
ETHERNET PORT
RS-232
SERIAL PORT
RS 232 RS-232 RS 232
SERIAL PORT SERIAL PORT
100MBIT
TXD
RXD