54
High Pressure Common Rail Injector Setup
This function serves to monitor and change injector barcode in the ECM as necessary.
The injector barcode is marked on the injector during manufacturing. Each time an
injector is fitted or replaced, the injector barcode should be updated in the ECM. In the
event of an ECM replacement, all of the injector barcodes must be updated.
1. Tap
AGT Electronic Actuator Installation and Calibration
from the service
function menu to enter the service screen.
2. Read the onscreen notification carefully and tap
OK
to proceed.
Figure 5-24
Sample Injector Service List Screen
Figure 5-25
Sample Turbo Service Screen 1
Содержание MAXISYS
Страница 83: ...76 Figure 8 9 Sample About Screen ...
