Autel MAXISYS, Руководство пользователя

Страница: 44 / 115

37
2. Tap the Range navigation button.
3. Select a parameter item on the left column, or enter the item name in the
Search bar.
4. Tap on the right side of the MIN button, and enter the required minimum
value.
5. Tap on the right side of the MAX button, and enter the required maximum
value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm button to turn
it on or off.
7. Tap Done to save the setting and return to the Live Data screen; or tap
Cancel to exit without saving.
If the threshold limits are successfully set, two horizontal lines will appear on each
of the data graphs (when Waveform Graph Mode is applied) to indicate the
alarming point. The threshold lines are shown in different colors from the waveform
of the parameters for distinction.
 Record Button
– displays the configuration screen for Record Setting, on
which you can set the trigger type, duration and trigger point for the data
recording function.
a) Trigger Type
– sets the trigger mode for data recording, mainly of two
kinds: Manual and Auto. There are four options available:
1) Manual
– allows you to manually start and stop data recording.
2) DTC
– auto triggers data recording when any DTC is detected.
3) DTC Check Mode
– auto triggers data recording when certain
pre-selected DTC types are detected.
4) Parameter
– auto triggers data recording when any parameter value
reaches the preset threshold.
b) Duration
– sets the recording time (for Auto trigger mode only)
c) Trigger Point
– reserves a relative percentage of a record length
before the data recording start point for reference (for Auto trigger
mode only).

To perform setting for live data record
1. Tap the Setting functional button at the bottom of the Live Data screen.
2. Tap the Record navigation button.
3. Tap the
○
> button on the right of Trigger Type bar and select the
required trigger mode.
4. Tap the
○
> button on the right of Duration bar and select a length of
time.