22
5. Tap
Done
. Once the vehicle is identified, the Vehicle Diagnostics screen
displays.
6. Tap
Cancel
to exit Manual Input.
Automatic Selection
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
To perform Automatic Selection
1. Tap the
Diagnostics
application button from the MaxiSys Job Menu. The
Vehicle Menu displays.
2. Tap the manufacturer button of the test vehicle.
3. Tap
Automatic Selection
and
the VIN information will be automatically
acquired. Follow the on-screen instruction to display the diagnostic screen.
Manual Selection
When the vehicle
’s VIN is not automatically retrievable through the vehicle's ECU, or the
specific VIN is unknown, the vehicle can be manually selected.
This mode of vehicle selection is menu driven, repeat the first two steps from the
automatic selection operation and tap
Manual Selection
. Through a series of on-screen
prompts and selections, the test vehicle is chosen. If needed, press the
Back
button at
the bottom right corner of the screen to return to the previous screen.
Figure 4-6
Sample Selection Screen
Содержание MAXISYS
Страница 83: ...76 Figure 8 9 Sample About Screen ...
