Autel MAXISYS, Руководство пользователя

Страница: 47 / 115

40
Oil Reset Service
This function allows you to perform reset for the Engine Oil Life system, which calculates
an optimal oil life change interval depending on the vehicle driving conditions and
climate. The Oil Life Reminder must be reset every time the oil is changed, so the
system can calculate when the next oil change is required.
IMPORTANT
Always reset the engine oil life to 100% after every oil change.
NOTE
All required work must be carried out before the service indicators are reset. Failure to
do so may result in incorrect service values and cause DTCs to be stored by the
relevant control module.
NOTE
For some vehicles, the scan tool can perform added functionality to reset additional
service lights (maintenance cycle, service interval). Taking BMW as an example, its
service reset function includes engine oil, spark plugs, front/rear brakes, coolant,
particle filter, brake fluid, micro filter, vehicle inspection, exhaust emission inspection
and vehicle check.
All software screens shown in this manual are examples, actual test screens may vary
for each vehicle being tested. Observe the menu titles and on-screen instructions to
make correct option selections.

To perform oil reset functions
1. Tap the Service application button from the MaxiSys Job Menu.
2. Tap Oil Reset button and wait for the vehicle manufacturer screen. You can tap
VIN Scan or the vehicle make to acquire vehicle VIN information and tap Yes
to confirm. See Vehicle Identification on page 19 for detail.
3. Trouble codes function allows you to read and clear trouble codes before or
after the service. Tap Special functions to display Oil Reset sub-function list,
the list may vary for different vehicles being tested.
4. Tap the sub-function you want to carry out.