Autel MAXISYS, Руководство пользователя

Страница: 43 / 115

36
NOTE
This mode supports Graph Merge for 2 to 3 parameter items only, so select no less than
2 or no more than 3 items each time when making graph merge.

To cancel Graph Merge mode, tap the drop-down button on the right side of the
parameter name, and select a data display mode.
Show Selected/Show All
– taps this option to switch between the two options; one
displays the selected parameter items, the other displays all the available items.
Setting
– tapping this button opens a setting screen, which allows you to set the
trigger mode, recording duration, and various threshold values for data recording,
and make other controls.
There are four navigation buttons on top of the Setting mode screen.
 Range Button
– displays the configuration screen on which you can set the
threshold values, an upper limit and a lower limit, for triggering the buzzer
alarm
. This function is only applied to the Waveform Graph display mode.
a) MIN
– tapping which opens a virtual keyboard, allowing you to enter the
required lower limit value.
b) MAX
– tapping which opens a virtual keyboard, allowing you to enter the
required upper limit value.
c) Buzzer Alarm
– switches the alarm on and off. The alarm function makes
a beep sound as a reminder whenever the data reading reaches the
preset minimum or maximum point.

To set threshold limits for the parameter values
1. Tap the Setting functional button at the bottom of the Live Data screen.
Figure 4-14 Sample Setting Mode in Live Data