AUMA SAExC 07.1, Руководство по эксплуатации

Страница: 3 / 76

22 5.3.2 Cable connection
23 5.3.3 Terminal compartment: close
23 5.4. Accessories for electrical connection
23 5.4.1 Parking frame
24 5.4.2 Protection cover
24 5.4.3 Earth connection, external
25 6. Operation................................................................................................................................
25 6.1. Manual operation
25 6.1.1 Manual operation: engage
25 6.1.2 Manual operation: disengage
26 6.2. Motor operation
26 6.2.1 Local operation
27 6.2.2 Actuator operation from remote
28 7. Indications..............................................................................................................................
28 7.1. Indication lights
28 7.2. Mechanical position indicator/running indication
30 8. Signals.....................................................................................................................................
30 8.1. Feedback signals via output contacts (binary)
30 8.2. Feedback signals (analogue)
31 9. Commissioning (basic settings)...........................................................................................
31 9.1. Heat-up time for low temperature version
31 9.2. Switch compartment: open
32 9.3. Torque switching: set
33 9.4. Limit switching: set
33 9.4.1 End position CLOSED (black section): set
34 9.4.2 End position OPEN (white section): set
34 9.5. Intermediate positions: set
35 9.5.1 Running direction CLOSE (black section): set
35 9.5.2 Running direction OPEN (white section): set
35 9.6. Test run
35 9.6.1 Direction of rotation: check
36 9.6.2 Limit switching: check
37 9.6.3 PTC tripping device (option): test
37 9.7. Potentiometer setting
38 9.8. Electronic position transmitter RWG: set
39 9.9. Mechanical position indicator: set
39 9.10. Switch compartment: close
41 10. Commissioning – controls settings.....................................................................................
41 10.1. Controls: open
41 10.2. Type of seating: set
42 10.3. Push-to-run operation or self-retaining: set
43 10.4. Running indication (blinker transmitter): activate/deactivate
43 10.5. Torque fault in collective fault signal: activate/deactivate
44 10.6. Positioner
44 10.6.1 Input ranges (signal type) for setpoint and actual value
45 10.6.2 Behaviour on loss of signal (actuator reaction)
46 10.6.3 Adjustment in end positions
48 10.6.4 Sensitivity setting
3
SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
AMExB 01.1
Table of contents