Make Calls with normal Telephones and change Settings
Enable a Connection without Dialling (Baby Call/Hotline)
43
Important: For the configuration of group multi-path call forwardings
the telephone used has to be a member of the group.
Note: If the telephone is “logged in“ outgoing in the group, you can
simplify the configuration of the multi-path call forwarding. If you con-
figure a multi-path call forwarding for this group on the corresponding
telephone, you can enter the programming digit sequence without the
telephone number of the group, that means “##97#...“.
To check whether multi-path call forwarding has been enabled or dis-
abled, dial ##97, the telephone number of the group and the charac-
ter string #*#481#. If multi-path call forwarding is disabled, you will
hear the busy tone.
Multi-path call forwarding for a group is executed during the entire
calling period independent of the ringer rhythm for the group.
Multi-path call forwarding for a group is not executed if the group itself
is the target of a forwarded call.
With the automatic dialling function you can configure your telephone
to dial automatically an internal or external number. This will start 2
seconds after taking the receiver off-hook. It is not necessary to press
any key. If you start to dial before these 2 seconds have elapsed, this
has priority. Please pay attention to the fact that some telephones do
not dial immediately after pressing the key (sometimes delayed by
1
/
2
second). In this case, you have to start dialling in time!
Important: A baby call configured by the user can be overridden
always or sometimes by the configuration of the administrator (see
chapter View and modify the Properties of your own Subscriber Port
on page 63
Configure Multi-path Call Forwarding for the Group
b ##97n #
*481* n
#
Called internal tele-
phone number*
*
Internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number. The entry of the telephone
number can be left empty if the subscriber is logged in outgoing in the group.)
Configure with internal target
internal telephone number**
**
Internal telephone number of the individual telephone (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
oder
*481* r
#
Configure with external target
external telephone number***
*** Exchange line access number 0 + external telephone number (If you use a direct exchange line telephone for the entry, the exchange line access number 0 is left out.)
or short-code dialling number (If you use a direct exchange line telephone for the entry,
**
is preceding the short-code dialling number.)
oder
*481#
Activate
oder
#481#
Deactivate
Enable a Connection without Dialling (Baby Call/Hotline)
