Make Calls with normal Telephones and change Settings
Signalling Calls on an Additional Number (Multi-path Call Forwarding)
42
Note: Phone numbers to be rerouted are telephone numbers dialled
by external callers (local PBX base DDI or local
MSN or local analogue telephone number).
If a preferred exchange line was configured for a telephone and the
same number is always transmitted for business calls, you can sim-
plify the configuration of the call forwarding. If you configure a call for-
warding for this group on the corresponding telephone, you can enter
the programming digit sequence without the telephone number to be
forwarded, that means “##96# “.“.
On the system telephones COMfortel 1100/1500/2500/2500 AB/VoIP
2500 AB the call forwarding for external numbers can comfortably be
switched via function key or via menu (see manual of the telephone
book).
If the permanent configuration is deactivated the current configura-
tion is activated.
With multi-path call forwarding, internal and external calls targeted to
a subscriber or group may also ring on an additional number (internal
or external). This is useful, for example, if a single user needs to be
reachable on two internal telephones or internally and on his mobile
telephone at the same time, without configuring call forwarding.
Multi-path call forwarding is always executed even if the “main tele-
phone number” is, for example, rerouted or busy (exception: enabled
MSN/DDI call forwarding via the network provider).
Note: To check whether multi-path call forwarding has been enabled
or disabled, dial the character string *#481#. If multi-path call forwar-
ding is disabled, you will hear the busy tone.
Activate Time Control for Call Forwarding for external Numbers
b
##96#
*69#
Time control is activated for the MSN of the dialling telephone.
Permanent configuration will be deactivated.
Correspond-
ing telephone
Activate
or
##96m # *69#
Time control is activated for the entered telephone number.
Permanent configuration will be deactivated.
Telephone number to
be forwarded*
*
External telephone number without exchange line access number (also with a direct exchange line telephone).
Activate
Signalling Calls on an Additional Number (Multi-path Call Forwarding)
Configure Multi-path Call Forwarding for the Subscriber
b
*481* n
#
Corresponding
telephone
Configure with internal target
internal telephone number*
*
Internal telephone number of the individual telephone (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
oder
*481* r
#
Configure with external target
external telephone number**
**
Exchange line access number 0 + external telephone number (If you use a direct exchange line telephone for the entry, the exchange line access number 0 is left out.)
or short-code dialling number (If you use a direct exchange line telephone for the entry,
**
is preceding the short-code dialling number.)
oder
*481#
Activate
oder
#481#
Deactivate
