manualshive.com logo in svg

Auditronics ALM-12d, Техническое руководство, Страница: 71 / 101

Поделиться
Скачать
Auditronics ALM-12d Скачать руководство пользователя страница 71

page  9 – 15

ALM-12d / Oct 2001

O P E R A T I O N

Meter Select Button

Press the METER SELECT BUTTON. The button lights, the CHANNEL

DISPLAY shows  SW METER, and the SOURCE DISPLAY shows the
signal currently feeding the switched meter pair. The ENTER BUTTON
begins to flash. Turn the SELECT KNOB until the desired source shows in the
SOURCE DISPLAY, then press the ENTER BUTTON (the ENTER BUT-
TON stops flashing). This selects the displayed source as the source for the
switched meter pair. The source name also shows in the METER DISPLAY,
and the METER SELECT BUTTON light goes off.

If you don’t hit the ENTER BUTTON or move the SELECT KNOB for

ten seconds the select process will terminate, leaving the selection for the
phone section unchanged.

Meter Display

The four character METER DISPLAY shows the source that has been

selected for metering by the SWITCHED METER PAIR.

CONTROL SECTION

The  CONTROL  SECTION  consists  of  a  CHANNEL  DISPLAY,  a

SOURCE DISPLAY, a SELECT KNOB, an ENTER BUTTON, and a MIX-
MINUS BUTTON.

Channel Display

When a source is being selected for a fader the CHANNEL DISPLAY

shows which fader is being accessed. During a mix-minus status check the
display shows “MIXMINUS”.  Otherwise the display shows “ALM-12d”.

Source Display

When a source is being selected for a fader the SOURCE DISPLAY shows

the name of the source currently selected for or being selected for the fader.
During a mix-minus status check the display shows software revision infor-
mation. Otherwise the display shows “ALM-12d”.

Select Knob

The SELECT KNOB is used to sequence a source-to-fader assignment

through its possible choices.

Enter Button

The ENTER BUTTON is used to accept a selection during the process of

source-to-fader assignment. Pressing the ENTER BUTTON is not a meaning-
ful action unless the button is flashing.

Содержание ALM-12d






































































































Отзывы:

Нет отзывов