manualshive.com logo in svg

Auditronics ALM-12d, Техническое руководство, Страница: 15 / 101

Поделиться
Скачать
Auditronics ALM-12d Скачать руководство пользователя страница 15

I N S T A L L A T I O N   a n d   P O W E R

page  1 – 7

ALM-12d / Oct 2001

Failsafe Dual Redundant Supply

Wheatstone failsafe power supply systems use two separate rackmount

power supplies for each piece of powered equipment. Though either is
capable of running a full load on its own, in failsafe operation both units
run in tandem:  if one fails, the other takes over, assuring uninterrupted
operation.

In order for failsafe systems to perform as designed, always have

BOTH rackmount supplies powered up and connected to their associated
equipment.

Energizing

Assuming the ALM-12d console mainframe is properly placed and

grounded, and its PSC-D340 power supply correctly rackmounted and
connected to the console, you may now energize the PSC-D340 rackmount
power supply by plugging it into the AC mains. The five LEDs on the
power supply front panel should light up to indicate the presence of their
respective voltages. The console's LED meters will illuminate and indi-
vidual module switches will assume factory default settings.

Once you have verified proper power-up, turn off the rackmount power

Once you have verified proper power-up, turn off the rackmount power

Once you have verified proper power-up, turn off the rackmount power

Once you have verified proper power-up, turn off the rackmount power

Once you have verified proper power-up, turn off the rackmount power
supply to de-energize the console. You may now proceed to wire up audio

supply to de-energize the console. You may now proceed to wire up audio

supply to de-energize the console. You may now proceed to wire up audio

supply to de-energize the console. You may now proceed to wire up audio

supply to de-energize the console. You may now proceed to wire up audio
and control connections.

and control connections.

and control connections.

and control connections.

and control connections.

Audio and Control Wiring

All audio and control I/O connections to the ALM-12d console are

made through multipin DB-25 connectors located on the rear panel of the
console.

The factory supplied hand crimping tool is used for all I/O wiring

connections to and from the console (see instruction on the page 1-9).

ALM-12d / Feb 2003

Содержание ALM-12d






































































































Отзывы:

Нет отзывов