manualshive.com logo in svg

Auditronics ALM-12d, Техническое руководство, Страница: 30 / 101

Поделиться
Скачать
Auditronics ALM-12d Скачать руководство пользователя страница 30

page  3 – 8

ALM-12d / Oct 2001

F A D E R   S E C T I O N

Opto-isolated  outputs  also  require  an  external  voltage  to  function

properly. As an example, consider the connections to use the ON TALLY
LOGIC OUTPUT to drive an external LED to indicate the ON status of the
channel mapped to the logic port. Connect the +5V source to the plus (+)
terminal of a 5V LED (30 mA or less). Connect the minus (-) terminal of the
LED to the output’s plus (+) terminal (pin 24). Connect the input’s minus
(-) terminal (pin 12) back to the ground connection of the ex5V
supply. In this way, when the channel the port is mapped to goes on, the LED
will light.

External relays or lower or higher voltage LEDs may also be driven by

the outputs. Use current limiting resistors when necessary, do not exceed
24V for the external supply, and always use snubber diodes across con-
nected relay coils.

Содержание ALM-12d






































































































Отзывы:

Нет отзывов