Auditronics ALM-12d Скачать руководство пользователя страница 10

Страница: 10 / 101

I N S T A L L A T I O N a n d P O W E R

page 1 – 2

ALM-12d / Oct 2001

Installation and Power

Unpacking the Console

The ALM-12d console is shipped as two packages. One carton

contains the console and documentation and the second carton contains
the Power Supply and connecting cable.

Countertop Installation

The ALM-12d digital audio console is designed for countertop

mounting. Console placement should avoid proximity to any electromag-
netic fields, such as large power transformers, motors, and fluorescent
lighting fixtures.

The console extends approximately 6” above the countertop at the

meterbridge.

Do not connect the ALM-12d console to its power supply (and do

not connect the power supply to the AC power line) until instructed
to do so.

NOTE:   This  console
contains  static-sensi-
tive  devices.  Normal
precautions  against
static discharge should
be observed.

16.702

26.500

5.911

18.201

CONNECTOR HOUSINGS

17.559

2.180

24.500

3.750

Содержание ALM-12d






































































































Результаты поиска

Содержание ALM-12d

Отзывы:

Auditronics ALM-12d, Техническое руководство, Страница: 10 / 101

Результаты поиска

Содержание ALM-12d

Отзывы: