AudioCodes Mediant 3000, Руководство пользователя

Страница: 814 / 872

User's Manual 814 Document #: LTRT-89729
Mediant 3000
Parameter Description
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings ]
For example:
TrunkGroupSettings 0 = 1, 0, 5, branch-hq, user, 1, 255, ;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Trunk Group
Settings' on page 327 .
Web: Channel Select
Mode
EMS: Channel Selection
Mode
[ChannelSelectMode]
Defines the method for allocating incoming IP-to-Tel calls to a
channel for all Trunk Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Cyclic Ascending.

[6] By Source Phone Number

[7] Trunk Cyclic Ascending

[8] Trunk & Channel Cyclic Ascending

[11] Dest Ascending
Notes:

For a detailed description of the parameter's options, see
'Configuring Trunk Group Settings' on page
327 .

Channel select mode per Trunk Group can be configured in the
Trunk Group Settings (see 'Configuring Trunk Group Settings' on
page
327 ).
Web: Default Destination
Number
[DefaultNumber]
Defines the default destination phone number, which is used if the
received message doesn't contain a called party number and no
phone number is configured in the Trunk Group Table' (see
Configuring the Trunk Group Table on page
325 ). This parameter is
used as a starting number for the list of channels comprising all the
device's Trunk Groups.
The default is 1000.
Web: Source IP Address
Input
[SourceIPAddressInput]
Determines which IP address the device uses to determine the
source of incoming INVITE messages for IP-to-Tel routing.

[-1] = (Default) Auto Decision - if the IP-to-IP feature is enabled,
this parameter is automatically set to Layer 3 Source IP. If the IP-
to-IP feature is disabled, this parameter is automatically set to
SIP Contact Header (1).

[0] SIP Contact Header = The IP address in the Contact header
of the incoming INVITE message is used.

[1] Layer 3 Source IP = The actual IP address (Layer 3) from
where the SIP packet was received is used.
Web: Use Source Number
As Display Name
EMS: Display Name
[UseSourceNumberAsDi
splayName]
Determines the use of Tel Source Number and Display Name for
Tel-to-IP calls.

[0] No = (Default) If a Tel Display Name is received, the Tel
Source Number is used as the IP Source Number and the Tel
Display Name is used as the IP Display Name. If no Display
Name is received from the Tel side, the IP Display Name remains
empty.

[1] Yes = If a Tel Display Name is received, the Tel Source