AudioCodes Mediant 3000, Руководство пользователя

Страница: 533 / 872

Version 6.6 533 Mediant 3000
User's Manual 41. Software Upgrade
Notes:
•
The Dial Plan file must not contain overlapping prefixes. Attempting to
process an overlapping configuration by the DConvert utility results in an
error message specifying the problematic line.
•
The Dial Plan index can be selected globally for all calls (as described in
the previous procedure), or per specific calls using Tel Profiles.
•
It may be useful to configure both Dial Plan file and Digit Maps. For
example, the Digit Map can be used for complex digit patterns (which are
not supported by the Dial Plan) and the Dial Plan can be used for long
lists of relatively simple digit patterns. In addition, as timeout between
digits is not supported by the Dial Plan, the Digit Map can be used to
configure digit patterns that are shorter than those defined in the Dial
Plan or left at default (MaxDigits parameter). For example, the “xx.T” digit
map instructs the device to use the Dial Plan and if no matching digit
pattern is found, it waits for two more digits and then after a timeout
(TimeBetweenDigits parameter), it sends the collected digits. Therefore,
this ensures that calls are not rejected as a result of their digit pattern not
been completed in the Dial Plan.
•
By default, if no matching digit pattern is found in both the Dial Plan and
Digit Map, the device rejects the call. However, if you set the
DisableStrictDialPlan parameter to 1, the device attempts to complete
the call using the MaxDigits and TimeBetweenDigits parameters. In such
a setup, it collects the number of digits configured by the MaxDigits
parameters. If more digits are received, it ignores the settings of this
parameter and collects the digits until the inter-digit timeout configured by
the TimeBetweenDigits parameter is exceeded.
41.1.4.3 Dial Plan Prefix Tags for IP-to-Tel Routing
The device supports the use of string labels (or "tags") in the external Dial Plan file for
tagging incoming IP-to-Tel calls. The special “tag” is added as a prefix to the called party
number, and then the Inbound IP Routing Table uses this “tag” instead of the original
prefix. Manipulation is then performed after routing in the Manipulation table, which strips
the “tag” characters before sending the call to the endpoint.
This feature resolves the limitation of entries in the Inbound IP Routing Table (IP-to-Tel call
routing) for scenarios in which many different routing rules are required. For example, a city
may have many different area codes, some for local calls and others for long distance calls
(e.g. 425-202-xxxx for local calls, but 425-200-xxxx for long distance calls).
For using tags, the Dial Plan file is defined as follows:

Number of dial plan (text)

Dial string prefix (ranges can be defined in brackets)

User-defined routing tag (text)
The example configuration below assumes a scenario where multiple prefixes exist for
local and long distance calls: