AudioCodes Mediant 3000, Руководство пользователя

Страница: 429 / 872

Version 6.6 429 Mediant 3000
User's Manual 28. SBC Overview

To configure the Shared Line feature:
1. In the IP Group table (see 'Configuring IP Groups' on page 230 ), add a Server-type IP
Group for the BroadWorks server.
2. In the IP Group table, add a User-type IP Group for the IP phone users and set the
'Enable SBC Client Forking' parameter to
Yes so that the device forks incoming calls
to all contacts under the same AOR that are registered in the device's registration
database.
3. In the IP-to-IP Routing table (see 'Configuring SBC IP-to-IP Routing' on page 446 ),
add a rule for routing calls between the above configured IP Groups.
4. In the IP to IP Inbound Manipulation table (see 'Configuring IP-to-IP Inbound
Manipulations' on page
457 ), add a manipulation rule for the secondary extensions
(e.g., 601 and 602) so that they also register in the device's database under the
primary extension contact (e.g., 600):
•
Set the 'Manipulation Purpose' field to Shared Line .
•
Set the 'Source IP Group' field to the IP Group ID that you created for the users
(e.g., 2).
•
Set the 'Source Username Prefix' field to represent the secondary extensions
(e.g., 601 and 602).
•
Set the 'Manipulated URI' field to Source to manipulate the source URI.
•
Set the 'Remove From Right' field to "1" to remove the last digit of the extensions
(e.g., 601 is changed to 60).
•
Set the 'Suffix to Add' field to "0" to add 0 to the end of the manipulated number
(e.g., 60 is changed to 600).