AudioCodes Mediant 3000, Руководство пользователя

Страница: 732 / 872

User's Manual 732 Document #: LTRT-89729
Mediant 3000
Parameter Description
(always 0), TOC, no m-factor.

[2] = Payload including TOC only, allow m-factor.

[3] = RFC 3558 Interleave/Bundled format.
EMS: VBR Coder Hangover
[VBRCoderHangover]
Defines the required number of silence frames at the beginning of
each silence period when using the VBR coder silence
suppression.
The range is 0 to 255. The default is 1.
Web: AMR Payload Format
[AmrOctetAlignedEnable]
Defines the AMR payload format type.

[0] Bandwidth Efficient

[1] Octet Aligned (default)
Web: Speex NB Bit Rate
EMS: Speex NB Bit Rate
[SpeexNBBitRate]
Defines the transmit (Tx) bit rate for the Speex narrowband codec
at clock rate of 8 kHz sampling rate.

[1] 2.15 Kbps

[2] 5.95 Kbps

[3] 8.00 Kbps (default)

[4] 11.0 Kbps

[5] 15.0 Kbps

[6] 18.2 Kbps

[7] 24.6 Kbps

[8] 3.95 Kbps
Web: Speex WB Bit Rate
EMS: Speex WB Bit Rate
[SpeexWBBitRate]
Defines the transmit (Tx) bit rate for the Speex wideband codec at
clock rate of 16 kHz sampling rate.

[0] 3.95 Kbps

[1] 5.75 Kbps

[2] 7.75 Kbps

[3] 9.80 Kbps

[4] 12.8 Kbps

[5] 16.8 Kbps

[6] 20.6 Kbps

[7] 23.8 Kbps

[8] 27.8 Kbps(default)

[9] 34.2 Kbps

[10] 42.2 Kbps
DSP Templates Table
Web: DSP Template Mix Table
EMS: VoP Media Provisioning
> General Settings
[DSPTemplates]
This table parameter allows the device to use a combination of two
DSP templates and determines the percentage of DSP resources
allocated per DSP template.
The format of this parameter is as follows:
[DspTemplates]
FORMAT DspTemplates_Index =
DspTemplates_DspTemplateNumber,
DspTemplates_DspResourcesPercentage;
[\DspTemplates ]
For example, to load DSP Template 1 to 50% of the DSPs, and
DSP Template 2 to the remaining 50%, the table is configured as
follows:
DspTemplates 0 = 1, 50;
DspTemplates 1 = 2, 50;