AudioCodes LTRT-94602, Руководство пользователя

Страница: 38 / 66

EMS Alarm Guide 38 Document #: 94602
EMS
Table 2-18: GW Switchover Alarm
Description Ethernet switch/Shelf Controller/TP board switchover
SNMP Alarm tgGwSwitchoverAlarm
SNMP OID 1.3.6.1.4.1.5003.9.1.2.2.0.31
Alarm Title SwitchOver Alarm
Alarm Source Board# of the active board
Alarm Type Equipment failure
Probable Cause Equipment malfunction
Severity Major for fails, Cleared when changed to normal
Additional Info Ethernet Switch /Shelf Controller/TP board switchover. Board x is now
active
Corrective Action Refer to the Installation & Operation Manual.
2.20 Configuration Change
The table describes the alarm and shows the alarm information presented to Users. For
Users' convenience, all alarms generated by the Media Gateway have the same standard
structure, including the fields shown in the table.
Table 2-19: Configuration Change
Description This trap is generated when a configuration change is performed on any
MG managed object. One trap is generated for each modified parameter.
It includes MO name, parameter name, new and old values.
SNMP Alarm
tgConfigurationChange
SNMP OID 1.3.6.1.4.1.5003.9.1.2.2.0.32
Alarm Title
Alarm Source Managed Object Path
Alarm Type Other
Probable Cause Other
Severity Info
Additional Info <parameter mib name> (<parameter ems name>) changed from <value>
to <value>.
For example: tgTPBoardSubnetMask (IP Subnet Mask) changed from
255.255.255.0 to 255.255.0.0
Corrective Action Refer to the Installation & Operation Manual.