AudioCodes LTRT-94602, Руководство пользователя

Страница: 32 / 66

EMS Alarm Guide 32 Document #: 94602
EMS
Table 2-11: Ethernet Internal Link Alarm
Description Ethernet link between the ES and the Media Gateway board has failed /
has been established.
SNMP Alarm tgEthernetInternalLinkAlarm
SNMP OID 1.3.6.1.4.1.5003.9.1.2.2.0.12
Alarm Title Ethernet Uplink Alarm
Alarm Source Board#
Alarm Type Communication Alarm
Probable Cause Loss of signal
Severity Major for disable, Cleared for enable
Additional Info Info 1: Mediant 5000 - MG Slots Ethernet links status:1,2 =
00,5..10=00000
Mediant 8000 - MG Slots Ethernet links status:1..8 = 00000000 ,10..18
=00000….
Info 2: ES Ports (ES LEDs) status: 1..26 = 010100101 ……
Corrective Action
Refer to the Installation & Operation Manual.
2.13 Power Supply Alarm
The table describes the alarm and shows the alarm information presented to Users. For
Users' convenience, all alarms generated by the Media Gateway have the same standard
structure, including the fields shown in the table.
Table 2-12: Power Supply Alarm
Description Specifies:
Alarm severity
Fan number
Current value
SNMP Alarm tgPowerSupplyAlarm
SNMP OID 1.3.6.1.4.1.5003.9.1.2.2.0.13
Alarm Title Power supply alarm
Alarm Source SAT/PS/'location description'
Alarm Type Equipment alarm
Probable Cause Power problem
Severity Major for FAIL and EXIST; Minor for DEG; Cleared
Additional Info Info 1: Current status of fault cassette
Info 2: Status of other PS cassettes
Corrective Action If set, check the LED indicators of the suspected PS. If blinking or off,
unplug and plug in again. Otherwise replace the unit.