AudioCodes LTRT-94602, Руководство пользователя

Страница: 10 / 66

EMS Alarm Guide 10 Document #: 94602
EMS
1.1 Cannot Bind SNMP Trap Receiver
Table 1-1: Cannot Bind SNMP Trap Receiver
Textual Description This alarm is generated during server startup if an error occurs
indicating that the SNMP trap receiver port is already taken.
SNMP OID
1.3.6.1.4.1.5003.9.20.3.2.0.1
AlarmTitle Cannot Bind SNMP Trap Receiver
ItuAlarmType Environmental Alarm
AlarmSource EMS Server
Probable Cause
Application Subsystem Failure
Severity Critical
Additional Info -
Corrective Action Run netstats command to verify which application uses alarms
reception port (by default UDP post 162).
ƒ
EMS application: If it's busy, check what application uses this port.
If it's not freed by the EMS application, restart the EMS server
application according to the equipment installation manual.
ƒ
Other network management application: Change the EMS
application and all managed gateways' default alarm reception
ports.
Media Gateways All the gateways managed by the EMS