manualshive.com logo in svg

ATS BBR3, Инструкция по эксплуатации

Поделиться
Скачать
ATS BBR3 Скачать руководство пользователя страница 24

MAN - BBR3 - REV: Original | D. Installation

19

WARNING:

 

Do not over tighten the load nose, or damage to the load cell may occur. 

5.  Once the load nose is secured, lift the upper portion of the shroud around it. Use the back two screws to guide it 

into place before tightening them and carefully screwing in the front two screws. See Figure D.6.

CAUTION: Do not over tighten the loading shaft on 

the load cell, or the load cell may become damaged.  

The load cell is extremely sensitive to this twisting 

movement.

CAUTION: The load cell can be easily damaged, 

especially from side loading and excessive torque.  DO 

NOT place Load Frame on its side once the Load Nose 

is in place. Improper handling will result in irreversible 

Load Cell damage.

6.  To re-attach the lower portion of the load shroud, place the lower portion of the shroud on a flat surface. 

CAREFULLY lift the load frame, and position it so that the load nose is directly above the lower portion of the 

shroud (Figure D.7). Lift the lower portion of the shroud up and gently screw it in to the upper portion (Figure D.8).

Figure D.5 - Tightening the Set 

Screw

Figure D.4 - Set Screw Location on 

Load Nose

Figure D.7 - Attaching lower 

portion of Load Shroud

Figure D.8 - Attaching lower 

portion of Load Shroud

Figure D.9 - Attached Load Nose with 

Shroud

Figure D.6 - Upper portion of shroud 

attached to Load Cell

Содержание BBR3
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды