manualshive.com logo in svg

ATS BBR3, Инструкция по эксплуатации

Поделиться
Скачать
ATS BBR3 Скачать руководство пользователя страница 20

MAN - BBR3 - REV: Original | C. System Overview

15

 

 

Data Instruments

The Data Instruments box and Signal Conditioner Modules, along with the 3 Solid State Relays, are all located 

on the RIGHT side of the BBR3 base unit as viewed from the front (see Figure C.10).  

1.  DATA ACQUISITION BOX - Digitizes the amplified voltages from the Load Cell and Signal Conditioner 

Modules and sends that information to the PC. Also receives command signals from the BBR3 Computer 

and sends those signals to the Solid State Relays to operate the stirrer motor, bath heater, and load control 

solenoid valve.

2.  LOAD CELL SIGNAL CONDITIONER MODULE - Receives and conditions the output of the Load Cell, and 

supplies an amplified voltage output to the Data Acquisition Box. 

3. LVDT SIGNAL CONDITIONER MODULE - Receives and conditions the output of the LVDT  

  Displacement Sensor, and supplies an amplified voltage output to the Data Acquisition Box. 

4 - 6.  DC VOLT SOLID STATE RELAYS - Used to control the functions of the Bath Heater (4), Stirrer Motor (5), 

and Load Control Solenoid Valve (6). These modules are identical and interchangeable. 

Figure C.10 - Data Instruments

1

2

3

4

5

6

Содержание BBR3
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды