ATS BBR3 Скачать руководство пользователя страница 14

Страница: 14 / 55

MAN - BBR3 - REV: Original | C. System Overview

C.2 General Product Description

The ATS Bending Beam Rheometer 3 (BBR3) is designed to provide a state-of-the-art means for testing the

flexural creep stiffness properties of asphalt binders in a temperature range from -40°C to ambient. This testing is in

accordance with the Strategic Highway Research Program (SHRP) Test Method B-002, AASHTO Designation T313,

AASHTO TP 87, BS EN14771, and ASTM D 6648 specifications. The BBR3’s design does not allow for it to perform

any additional functions other than the intended functions specified in this manual.

The BBR3 test control function and data acquisition is operated by a Windows®-based computer inside the

machine. During testing, the software controls the BBR3 load function, displays and records the load, deflection, and

temperature data received from the unit. When tests are not being performed, the software permits access to test

information including graphs, raw data tables, and test analysis.

The BBR3 is a fully integrated, modularized system consisting of the following:

Major Components

•  Base unit
•  Load frame assembly
•  BBR3 software
•  Mechanical refrigeration unit

Accessory Items

• Specimen Molds (5 molds)
•

Confidence Beam

•  Non-Compliant Beam
•  Crack Sealant (CS) Non-Compliant Beam
•  Step Disk
•  Load Cell Calibration Weights (4) 100-gram and (2) 2-gram
•  Crack Sealant Specimen Molds

Product Specifications

Load Frame Construction

Integral stainless steel, frictionless construction

Loading Shaft Point

In-line stainless steel with blunt point

Test Load

Variable test range from 0 to 4,000 mN standard. System. Maintains

required test load /- 5mN throughout test cycle.

Test Cycle Times

Cycle times for pre-load, recovery, and test load are completely

operator-adjustable.

Load Cell

500 g (temperature-compensated)

Содержание BBR3
























































Результаты поиска

Содержание BBR3

Отзывы:

Бренды по названию

Популярные бренды

ATS BBR3, Инструкция по эксплуатации

Результаты поиска

Содержание BBR3

Отзывы:

Бренды по названию

Популярные бренды