Atag XL105F, Инструкция по установке и обслуживанию

Страница: 80 / 108

80
Commissioning
Weather compensation
Select thermoregulation type
7RVHWWKHERLOHUWRZHDWKHUFRPSHQVDWLRQSOHDVHVHWSDUDPHWHUWRZLWKDQ212))RUH%XVFRQWUROOHU
1 Use “+” to go down and “–” to go
up to highlight the Parameters Zone
you want to set. In this case
Zone 1 Parameters .
Press OK .
2 Use “+” to go down and “–” to go
up to highlight
4.2 Z1 Settings .
Press OK .
3 Use “+” to go down and “–” to go
up to highlight
4.2.1 Thermoregulation .
Press OK .
0DNHDFKRLVHEHWZHHQ
5 :
)L[)ORZ7
5RRPWKHUPRVWDWZLWK¿[HGÀRZWHPSHUDWXUH
7VWDUWƒ& 1
, every 16 min ±4 K)
1)
= Factory setting at high temperature level
1 Basic Thermoreg
5RRPWKHUPRVWDWZLWKDXWRPDWLFÀRZWHPSHUDWXUHDGDSWDWLRQ
2 Room T Only
3XUHURRPWHPSHUDWXUHFRQWUROZLWKURRPVHQVRU
7KHÀRZWHPSHUDWXUHLVFRQWUROOHGDVDIXQFWLRQRIWKHURRPWHPSHUDWXUH
setpoint, the current room temperature and its current course. A slight
increase in the room temperature, for example, immediately reduces the
ÀRZWHPSHUDWXUH
3 Outdoor T Only
:HDWKHUGHSHQGHQWFRQWUROZLWKRXWGRRUVHQVRU
7KHÀRZWHPSHUDWXUHLVFDOFXODWHGYLDWKHKHDWLQJFXUYHDVDIXQFWLRQRIWKH
current outdoor temperature. This type of control requires that the heating
FKDUDFWHULVWLFLVVHWFRUUHFWO\DVWKHFRQWUROV\VWHPGRHVQRWWDNHURRP
temperature into account in this setting.
4 Room + Outdoor T
:HDWKHUDQGURRPWHPSHUDWXUHFRQWUROZLWKRXWGRRUDQGURRPVHQVRU
The deviation of the room temperature from the setpoint is recorded and
WDNHQLQWRDFFRXQWGXULQJWHPSHUDWXUHFRQWURO,QWKLVZD\DQ\H[WHUQDOKHDW
JHQHUDWHGFDQEHWDNHQLQWRDFFRXQWDQGDPRUHFRQVWDQWURRPWHPSHUDWXUH
EHFRPHVSRVVLEOH
7KHLQÀXHQFHRIWKHGHYLDWLRQLVVHWSURSRUWLRQDOO\7KHEHWWHUWKHUHIHUHQFH
room is (unaltered room temperature, correct installation location, etc.), the
KLJKHUWKHYDOXHFDQEHVHW
Example:
Approx. 4: Good reference room
$SSUR[8QIDYRXUDEOHUHIHUHQFHURRP
0 Network
4 Zone1 Parameters
5 Zone2 Parameters
6 Zone3 Parameters
24 Commercial boiler
Menu
0 Network
4.1 S/W Changeover
4.2 Settings
4.0 Setpoint
4.3 Diagnostics
4 Zone1 Parameters
4.2.1 Thermoregulation 0
4.2.2 Slope 1.5
4.2.4 Room Influence Proportional 10
4.2.0 Zone temperature range 1
4.2.3 Offset 0
4.2 Settings