Ceiling
Individual flue:
min. 500mm
Collective flue:
dependant on
the selected
flue system.
Please contact
the supplier
50 - 70 mm
18
Installation
Installation Connections
The installation location of the
&+ERLOHUVKDVWREHDQGUHPDLQ
frost-free.
It is NOT necessary to have a purpose
provided air vent providing a twin
SLSHRUFRQFHQWULFURRPVHDOHGÀXH
system is used in the room or internal
VSDFHLQZKLFKWKHERLOHULVLQVWDOOHG
Neither is normally required a provision
for general cooling due to the very
ORZKHDWORVVIURPWKHERLOHUKHDW
exchanger and casing.
7KHÀRRUVKRXOGEHÀDWDQGOHYHODQG
KDYHVXႈFLHQWGHDGZHLJKWFDSDFLW\
IRUWKHFRPSOHWH¿OOHGLQVWDOODWLRQ
:KHHOVFDQEHDGMXVWHGPPWR
FRPSHQVDWHHYHQWXDOÀRRULUUHJXODULW\
The ATAG XL F cascade
FDQEHPRXQWHGLQZD\V
- Floor standing in line
$OOERLOHUVVWDQGLQJDORQJVLGHRQH
10 mm
100 mm
1000 mm
10 mm
1. Boiler return connection
%RLOHUÀRZFRQQHFWLRQ
3. Condensate drain
4. Gas
5. Flue gas outlet
6. Air supply
DQRWKHULQDÀRRUVWDQGLQJIUDPH
Refer to page 12.
-
Floor standing back-to-back.
$OOERLOHUVVWDQGLQJEDFNWREDFN
RQDÀRRUVWDQGLQJIUDPH
Refer to page 13.
General guidelines:
Pay attention to the minimum
distance required between the
ERLOHUVZDOOVDQGFHLOLQJIRU
installing and removing the housing
(refer to above) for commissioning
DQGVHUYLFLQJDQGLQVWDOOLQJWKHÀXH
system (refer to chapter 7).
,I\RXKDYHRSWHGWREXLOGWKHK\GUDXOLF
part yourself, then ATAG recommends
using “Connection set ATAG XL F as
VLQJOHERLOHU´IRUHDFKERLOHU
1
2
3
4
5
6
