Asus ROG STRIX X370-I, Руководство пользователя

Страница: 22 / 79

1-10
Chapter 1: Product Introduction
Chapter 1
2. AMD Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD X370 chipset.
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID]
.
• Before creating a RAID set, refer to section
RAID configurations
or the manual
bundled in the motherboard support DVD.
• When using NCQ, set the SATA Mode in the BIOS to [ AHCI ]. Refer to section SATA
Configuration for details.
SATA6G_4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXN4
RSATA_RXP4
GND
SATA6G_3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
SATA6G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
SATA6G_1
GND
RSATA_TXP1 RSATA_TXN1
GND
RSATA_RXN1 RSATA_RXP1
GND
ROG STRIX X370-I GAMING
SATA 6.0Gb/s connectors
A
A B
B
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
3. USB 2.0 connector (10-1 pin USB12)
This connector is for a USB 2.0 port. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complies with USB 2.0 specification that supports up to 480 Mb/s connection
speed.
ROG STRIX X370-I GAMING USB2.0 connector
NC
GND
USB_P2-
USB+5V
GND
USB_P1-
USB+5V
USB12
PIN 1