Asus ROG STRIX X370-I, Руководство пользователя

Страница: 20 / 79

1-8
Chapter 1: Product Introduction
Chapter 1
1.1.7 Headers
1. Clear RTC RAM jumper (2-pin CLRTC)
This jumper allows you to clear the CMOS RTC RAM data of the system setup
information such as date, time, and system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the < Del > key during the boot process and enter BIOS setup to re-enter
data.
ROG STRIX X370-I GAMING Clear RTC RAM
CLRTC
GND
+3V_BAT
PIN 1
Except when clearing the RTC RAM, never place a metal object or jumper cap on the
CLRTC jumper. Placing a metal object or jumper cap will cause system boot failure!
• If the steps above do not help, remove the onboard battery and place a metal object
or jumper cap again to clear the CMOS RTC RAM data. After the CMOS clearance,
reinstall the battery.
• You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
• Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and turn on the power supply or unplug and plug the power cord before
rebooting the system.