Asus ROG STRIX X370-I, Руководство пользователя

Страница: 59 / 79

3-14
Chapter 3: BIOS Setup
Chapter 3
3.6.3 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show
Empty
if no SATA device is installed to the corresponding SATA port.
SATA Port Enable
This item allows you to enable or disable the SATA Device.
Configuration options: [Disabled] [Enabled]
SATA Mode
This item allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID configuration from
the SATA hard disk drives.
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1~4 (Gray)
Allow you to enable/disable the SATA6G_1~4 port. Configuration options: [Disabled]
[Enabled]
Hot Plug
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
M.2_1
Click to assign a new name for the M.2_1 port.
3.6.4 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]