Asus ROG STRIX X370-I, Руководство пользователя

Страница: 24 / 79

1-12
Chapter 1: Product Introduction
Chapter 1
7. Thermal sensor connector (2-pin T_SENSOR)
This connector is for the thermistor cable that allows you to monitor the temperature of
your motherboard’s critical components and connected devices.
PIN 1
T_SENSOR
SENSOR IN
GND
ROG STRIX X370-I GAMING Thermal sensor connector
6. Addressable RGB header (4-1 pin ADD_HEADER)
This connector is for individually addressable RGB WS2812B LED strips with
embedded WS2811LED driver ICs.
The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs.
Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the addressable RGB LED strip is
connected in the correct orientation, and the 5V connector is aligned with the 5V
header on the motherboard.
• The addressable RGB LED strip will only light up under the operating system.
• The addressable RGB LED strip is purchased separately.
PIN 1
+5V
Data
Ground
ADD_HEADER
ROG STRIX X370-I GAMING ADD header