Assa Abloy TRAKA32, Руководство пользователя

Страница: 791 / 919

V3.5 14/08/19 UD0089 Page 791
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
There are five security levels to choose from, the security levels get increasingly harder to enrol with as the
numbers ascend (number 1 being the easiest and number 5 being the hardest), however if you enrol with a high
security level you are heightening the sensitivity of the reader, this will ensure you get a good quality template. You
have to be very accurate with your finger placement when enrolling with a higher security level.
Pin Only
This option is available at the LCD when enrolling and is also configurable as a 'Global Security Level' (see below).
When this option is selected and a user enrols with their PIN, they become a 'PIN only' user and they wont be
prompted to use place their finger on the reader. To allow the user to use Fingerprint entry again, you will have to
reset that particular users fingerprint template in their User Details and enrol again.
Global Security Level
The Global Security Level is effectively a 'shared' security level that is the same for every user who enrols with it. If
you configure the global security level to 3 for example, then any user who enrols using the Global Security Level
option is enrolling at security level 3. Also all users who enrol using the Global Security Level are affected if it
changes, for example, if several users are enrolled with the global Security Level which is 1 and that gets changed
to 5, all the those users security levels will change to 5 immediately. The Global Security Level can be configured for
any of the five security levels, or there are other options such as 'PIN Only' & 'Any Fingerprint'.
NOTE: If the 'Prompt for Security Level when Enrolling' option is not enabled, every user will be
automatically forced to enrol with the default Global Security Level.
Pin Only
As mentioned above this option is available at the LCD as well as the Global Security Level. When this option is
selected and a user enrols with their PIN, they become a 'PIN only' user and they wont be prompted to use place
their finger on the reader. To allow the user to use Fingerprint entry again, you will have to reset that particular
users fingerprint template in their User Details and enrol again.
Any Fingerprint
This option is only available as a Global Security Level and allows any users fingerprint to access the system,
assuming their PIN number is correct and they have sufficient access to the system. This option is in fact a
'dummy' option used for sites that wish to have the illusion of a fingerprint reader.
To configure the Global Security Level, right click the cabinet/system from the 'System Viewer', scroll down to
Biometrics Admin, then select 'Configure Biometrics'.