Assa Abloy TRAKA32, Руководство пользователя

Страница: 764 / 919

V3.5 14/08/19 UD0089 Page 764
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
4.11.7 HOW TO TAKE AN IFOB
Button Release System
1. First access the Traka System. Please refer to the ' How to access the system? ' section.
2. To take an iFob...

If the position is a Locking position, press the black button against the iFob until you hear a beep.
Release the button, the solenoid that holds the iFob in place will activate and you should be able to
remove the iFob.

If the position is a Non-Locking position, simply remove the iFob and check the LCD displays the
correct position number.
NOTE: The iFob description may be shown on the LCD when a user removes the iFob from
the system.
NOTE: If you do not have access to the iFob the LCD will display iFob NOT Authorised. If
you should have access to the iFob then check the access level of the iFob and the current
access levels of the user match.
3. The LCD will display the position number of the iFob you have taken.
4. Repeat step 2 and 3 for each iFob you require.
NOTE: If you have a no door system you will only be able to take one iFob at a time. To take
another iFob you will have to access the system again.
Keypad Release System
1. First access the Traka System. Please refer to the ' How to access the system? ' section.
2. Type in the position number of the iFob that you wish to take followed by #.
3. If the user has access and the iFob is currently in the system, the door will open and the iFob will be released.
NOTE: The Time Due Back for an item/iFob is now calculated when the item is taken during a Key Booking.
This information is displayed on the system viewer information panel and can also be seen in the iFob and
Key Current Holder Reports.