Assa Abloy TRAKA32, Руководство пользователя

Страница: 421 / 919

V3.5 14/08/19 UD0089 Page 421
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.19.2.2 X IFOB AUTHORISERS
Overview
X iFob Authorisers is an optional feature that can be configured to require either 1 or 2 persons to authorise a user to
access an iFob. Each iFob can be configured individually with no authorisation, 1 authorisation or 2 authorisations to be
required to enable a user to take it.
If a user tries to take an iFob that has been configured with 1 authorisation or 2 authorisations, then the system will
prompt for either 1 or 2 authorisers to swipe their cards (and/or enter their PIN's) before releasing the iFob. With the
basic 'X iFob Authorisers' (with no additional options) selected, any user registered on the system can authorise, and
the iFob will be released (providing the user has the correct access level). iFobs that are setup with no authorisation
can be accessed as normal by any user who has to matching access level.
A user can also be given the ability to self-authorise. To do this they must be given access level 199. This can
however, be overridden on an individual iFob basis by checking the 'Deny Single Authoriser Access' tick box in the
Edit
iFob Details page.
Additional Options
There are additional options that can be selected to further secure the removal of iFobs.

Force Access Level 199 To Authorise
If this option is selected in the firmware then the system will require the authoriser to have access level 199
to authorise other users to remove the iFob. If this option is enabled and the authoriser does not have access
level 199 then they will not be able to authorise. Users with access level 199 can also self-authorise, meaning
they can remove an iFob that requires authorisation without needing another authoriser.

Force Access Level 193 To Authorise
If this option is selected in the firmware, users with access level 193 will have the ability to authorise the
removal of an iFob, however they will be unable to self-authorise. Therefore if they try to remove an iFob that
requires authorisation then another authoriser will be required.
NOTE: This option works much the same as 'Force Access Level 199 To Authorise' but without the
ability to self-authorise. Both of these options can be used in conjunction with each other.

Force Authoriser from Different Group
This option forces each Authoriser to be from a different User Group than the user attempting to remove the
iFob. See the
User Groups topic for more details on groups.

X iFob Authorisers - Check Authoriser has iFob Access Level
This option forces the authoriser to have the access level of the iFob before they are permitted to authorise
its release for another user.

Authorisation Access Levels
This feature enables separate access levels for Authorisation only. The total number of access levels available
is divided in half with the first half remaining as iFob Access Levels and the second half being allocated as
Authorisation Access Levels. An authoriser must have an Authorisation Access Level that matches the access
level of the iFob, to be able to authorise. For example, if a user has iFob Access Level 5 and tries to remove
an iFob with access level 5, the authoriser must have Authorisation Access Level 5.