Assa Abloy TRAKA32, Руководство пользователя

Страница: 778 / 919

V3.5 14/08/19 UD0089 Page 778
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
The battery level can be checked by pressing Function Button 2 when on the idle screen of the iFob Transfer Unit
application, and when the unit is not connected via USB. On each successive press of Function Button 2 the device will
cycle through the information pages – on one of these pages the battery level is shown as follows:
The second line of the display is a bar chart where the battery level remaining is represented by ‘>’ symbols. If the
unit is charging then the battery level screen will show:
If the unit is fully charged but connected via USB then the battery level screen will show:
When the battery level reaches the low battery threshold, the user will be prompted with the following message when
waking the unit from sleep:
The idle screen of the iFob Transfer Unit Application will have a ‘
*
’ symbol in the top right hand corner of the display
which signifies that the battery level is low:
When the battery gets to the low state the unit should be charged immediately. Eventually the battery will be
discharged to the lock-out threshold where the unit is shut down and cannot be woken using Function Button 1. This is
to prevent the battery from deep discharging. At this point the unit must be recharged before further use is possible.
Setting up Traka32
The Traka Handheld Device can be configured through Traka32. The device is set up as if it is any other type of Traka
System and therefore has its own System Viewer page.